Storage That Fits and Functions

Cabinet and Shelving Installation in Grifton

When your kitchen cabinets do not close all the way or your shelves sag in the middle after a few months, it is usually because the units were not shimmed level during installation or because the wall anchors were not strong enough for the load. Desper Installation installs custom cabinetry and shelving in Grifton  for kitchens, bathrooms, closets, and living spaces, making sure every unit is plumb, level, and secured to the wall studs so it holds up under daily use.

We mount wall cabinets with a ledger board to keep them aligned while we fasten them, then shim base cabinets to compensate for uneven floors before securing them together and to the wall. Shelving is anchored with heavy-duty brackets or concealed supports depending on the look you want, and we cut shelves to fit around outlets, windows, or angled walls. The result is storage that does not shift, tip, or separate at the seams.

If you need cabinets or shelving installed in Grifton, reach out to go over the layout and schedule a time for the work.

What's Included in This Service

We bring a laser level, shims, clamps, and a drill with long screws to reach the studs behind the drywall. In Grifton, we also check the wall surface to make sure it can hold the weight of loaded cabinets, and we add blocking between studs if needed for extra support.

After installation, you will notice that cabinet doors close evenly without gaps, drawers slide smoothly without binding, and shelves stay flat even when loaded with dishes or books. Desper Installation adjusts hinges and drawer slides after the cabinets are mounted so everything operates correctly. Crown molding or scribe strips are added to cover gaps between the cabinets and the ceiling or walls.

We handle wall-mounted and base cabinets, floating shelves, closet organizers, and built-in bookcases, and we install the hardware you provide or recommend options based on the cabinet style. Most projects take one to two days depending on the number of units and whether we need to remove old cabinets first. We do not cut countertops or install sinks, but we will align the cabinets so your countertop installer has a level surface to work with.

Why Locals Choose This Option

Here are answers to common questions about cabinet and shelving installation in Grifton.

How do you make sure cabinets stay level on an uneven floor?
We use shims under the base cabinets to bring them level, then screw them to each other and to the wall studs so the whole run stays aligned. The toe kick hides the shims once the cabinets are in place.
What type of anchors do you use for wall-mounted shelving?
We fasten shelves directly to wall studs whenever possible using three-inch screws. If studs are not in the right location, we use toggle bolts rated for the weight of the shelf and its contents.
Why do cabinet doors sometimes hang crooked after installation?
Doors hang crooked when the cabinet box is not plumb or when the hinges are not adjusted correctly. We check both during installation and make adjustments so the doors align with each other and close fully.
How much clearance is needed between wall cabinets and the countertop?
Standard clearance is 18 inches, which gives you room to use small appliances and see what is on the counter. We adjust this if you have specific height requirements or if the ceiling is lower than usual.
What should I do if the wall is not strong enough for heavy cabinets?
We add horizontal blocking between the studs to create a solid mounting surface, or we use a French cleat system that distributes the weight across a larger area. This is common in older homes where the drywall is thinner.

Custom cabinets and shelving improve both storage and function, but only if they are installed correctly and secured to the structure behind the walls. Contact us to schedule a cabinet or shelving installation in Grifton and we will make sure everything is level, stable, and ready to use.